Beekeeper Cushion no.1.

 

My mission to finish the various projects sitting in bags in my spare room led me to get my head around this curiosity. It turned out to be the result of a Beekeeper's Quilt pattern I bought seven years ago, presumably to use up left-over bits of wool. I don't think I ever had the intention of making a quilt, and I certainly don't intend it now.

It is, however, a good way of using up left-over yarn. You knit a series of little pods, using three dpns. The first three rows getting set up are awkward

but it gets easier after that.

After 20 rows you stuff the pocket with wadding and join the two rows together.

After adding a few more pods, I wondered if any of my family were in need of a teacosy. It seemed to me that would be a good use to put this to.

No-one wanted a teacosy (nor did I, I have several!) but there was a very positive response to cushions to cover four particular church chairs, so, with measurements, I got to work.

I needed eight pods to cover the length stipulated, so as I finished each pod I added it to a central line to mark the length. I already had the width  of five pods

It gave me something to aim for and meant I could choose and spread the colours I had, rather than ending up with blocks of the same. 

I was a bit concerned that a cushion of such random colours might look out of place in a church. I checked out the Saint for which the church is named, St Margaret of Scotland, to see if she had any colour association. To my joy I discovered that one of her famous acts was to introduce colour into the Scottish Court! She encouraged ordinary people, as well as the nobility, to wear coloured clothing, and introduced colour into wall hangings and church furnishings! She also set up workshops in the palace to produce embroidered textiles - and was herself an embroiderer!  Wow!

Eight rows by five is obviously 40 pods needed. The rows, however, interlock, meaning that some half-pods are needed to give a straight edge on two ends.The other two sides meet in points, not conducive to squaring off in knitting.

So the last two pods were four halves - the trickiest to knit, since, to get a smooth edge, I cast on from the centre and decreased rather than the other way around. 

It is now a more-or-less rectangular cushion that fits in a particular space. I’m wondering how I could have made it a couple of cm wider to reach exactly to the front edge of the chair. 

Half pods wouldn’t work. Slightly larger pods on the front row might work, but the best answer might be to to join the pods in vertical, rather than horizontal rows, with half pods along the long, rather than the short edges. I shall wait for a report on how it works in practice. It may, in fact, not be an issue.

I can, however,  begin work on the next one!

All the pretty little horses

Some 15 years ago I had an idea to embroider a blanket for Brigid using a drawing she had done of horses. I sent for some cashmere blanketing from the Geelong Blanket Company and it has sat in my stash ever since. 

I've never quite given up the project. When I mentioned this a few weeks ago Brigid said she could use a blanket to wrap around her - so I dug it out and got to work.The concept was to use the words of the lullaby around the edge of the blanket - When you wake, you shall have, all the pretty little horses, dapples and greys, pintos and bays, all the pretty little horses - then to embroider the horses fanning out across the blanket, beginning with somewhat realistic colours, then moving into 'prettier' colours.

I managed to get the wording around the edge using a water-soluble pen and a ruler. The wool isn't great for taking pen.

I made the words a bit larger than I had first envisaged in order to keep them clear - but also to space them right around the blanket . 

(These photos were taken in poor light with limited angles. Apologies for poor quality.)

I began with the intention of using wool thread in shades of blue - even went to Create in Stitch and bought 13 skeins of Cascade House threads in blue through to teal. It was only when I had worked the first side in Quaker stitch during our election weekend that I realised I had picked the colours of a political party and a very successful group of independent candidates. 

This didn't seem appropriate in the heat of an election, so I modified my plan, working the full the next side into greens, then yellows and finally reds. 

In retrospect the colour change seems unnecessary - but it's a better result. While the Quaker stitch does show through on the other side, it was easy to stitch only part-way through the wool using a hoop, not leaving threads on the back.

Unfortunately, this hasn't been possible with the horses.

I figured printable Solvi was the easiest method of transferring the patterns since pen doesn't work so well on the wool. I got two sets of Brigid's drawings on each sheet, and printed 6 sheets. I began with 'dapples and greys' The photograph doesn't show the dapple very well, but it is there.

The Solvi proved a bit tough to stitch through. I also don't like having a barrier between my hands and the fabric. After I'd stitched half a dozen horses I figured I was familiar enough with the shape to try another method.

I glued a paper printout of each horse on to a piece of plastic cut from a milk bottle, then cut each one out.

This gave me three firm templates to trace around. It also means I can reverse the direction of the horse.

While the water-soluble pen doesn't give a fine line on the wool, it is enough for me to follow with the help of the firm template.

This has proved much quicker, easier and more flexible to work with.

The 36 drawings printed on the Solvi sheets have not been wasted. After the initial 9 horses were in place I needed to layout the rest across the blanket and have used the Solvi horses to achieve this.

I could cut them out with the backing on and move them around until I had what I wanted then remove the backing and stick them down. This allows me to remove them one at a time, replace with a drawing and embroider.  I think the adhesive will hold. If not, safety pins.

I'm still contemplating how to treat the back. I will need to cover the back of the embroidered horses. If I back the blanket with fabric I will need to quilt it down. I could do that by hand-stitching around each horse outline. An alternative I am considering is appliqueing a wool-felt piece over the back of each horse.  There's plenty of time to figure this out - I have 26 horses to embroider!

Knitting bits

For much of winter I knitted up some yarn my brother bought at an unclaimed post auction late last year. There were two huge boxes of yarn - more than I could ever use, so I chose three modest bags of what I thought most interesting. I've been trying to work my way through it. My new resolution is to use up yarn as far as possible as I buy it, rather than adding to the three drawers I have stashed. I succeeded in knitting up the wool I bought from North Ronaldsay, and some alpaca from Adagio - ands I've been trying to reduce this pile from my brother.

I tackled the easiest one first - a ball of Joy Rainbow tape designed to make a scarf. I adapted a pattern I found online for a scarf, and it knitted up quickly. 

The colours are attractive and the texture interesting. I narrowed the ends and created a loop on one end through which the other end slips.




It's a bit of fun - not really my style, but  someone might enjoy it for a while.












Next I tackled a
couple of balls of this rather attractive Sirdar Aura. These screamed 'hat' to me, so I tried out a couple of patterns, one for a beanie and one for a slouchy.

I rather like these, although I'm not sure it was a good idea to practice a new elastic cast-off on the slouchy. I think, however, some family members who like bushwalking will get good service from them.

I then turned my attention to some silvery Rico which I knitted up into a triangular shawl.

Once blocked, I got Veronica to model it for me. I think it needs to be blocked again, and stretched out a bit further. The yarn is spectacular but I'm not convinced  it works on its own.



I still had three balls left, so I tried a bit of an experiment, matching it with some fine one-ply mohair and a pattern for a chevron shawl that alternates one-ply mohair with four-ply merino. This is taking me a long time to knit, but is coming along beautifully. I think I might save that one for its own post.
In the meantime,  I bought a bit more Adagio alpaca - because Adagio are needing a bit of support through the drought, and I also bought a kit for a scarf from Marie Wallin - because it was beautiful. I doubt I am half way through my brother's wool - so I'm afraid there is no rest for my needles regardless of the heat!

Flora, the Herdwick Sheep

This was originally a very short post begun in 2017. While visiting Ruskin Cottage in the Lakes District that year, I bought a single ball of Herdwick wool. It was a natural coloured boucle and I thought it would make a good shawl.

I found a pattern I liked that I thought might do justice to the wool. It was knitted as a rectangle, folded and joined to form a kind of poncho. There was a patterned border along the front edge.

After knitting about 4 inches I decided it was a bad idea. The pattern did not show amongst the boucle and the wool merely looked grubby. I was hoping it might come in useful for one of the projects in the March 2019 Lady Anne's Needlework Retreat in the Lakes District, which focused on the life and work of Beatrix Potter.  This didn't work out either, so the boucle wool is down to experience.

I mention this by way of introduction to Nicola Jarvis's 

Herdwick sheep project from the retreat.                                                                                                                                                                    This is the project as it began. The beginning of the work, conducted in Bowness-on-Windermere last month is outlined in my travel blog.                             

By the end of my travels I had finished the sheep and a little of the dog roses. At the suggestion of one of my daughters, she is now called Flora.

As soon as I arrived home I got to work on the remainder.


I finished embroidering the dog roses

then moved on to foxgloves.






I found these quite tricky.  While I felt confident on light-shade balance on individual flower heads in front and behind each other , I was less convinced I managed the colour change up and down the stem.
The harebells and foxglove leaves were the last to go in.




Finally, I returned to the centres of the dog roses. I varied the stitch a little.


I'm very pleased with this result. I have enjoyed working on this. The texture of the finished piece is marvellous.

I am waiting for my Shaker Box to arrive to mount this piece in the lid. Wendy, from Australian Needle Arts has it ready to mail as soon as she recovers from the flu.



I will post again when the box arrives and I have the embroidery it mounted.

Rainbow shawl

The second shawl in my 2018 shawl binge was a feather and fan triangle from a ball of lovely variegated 2 ply I bought a few years ago in New York from a place called Knitty City in the Upper West Side. I saw a shawl in the window one evening and went back when the shop was open to buy the pattern and yarn. I made the shawl for a neighbour but had bought a spare ball. I wanted my neighbour's shawl to be unique, so I've repeated the pattern with different yarn. The spare ball has been waiting for me to find a new pattern for it.

I settled on a feather and fan which worked well. I simply kept knitting until the yarn was used up.










Then I blocked the shawl on the largest towel I could find - my stripy beach towel.

It blocked beautifully - and yes, passes the wedding ring test!


One of my granddaughters says it is a veil for a Gay wedding!



I haven't yet found the recipient for it - but I know that will become clear  - the secret name of the rightful owner will be revealed one day!